It is extremely unpleasant to break the touch screen of a high-end smartphone, such as an iPhone, Galaxy S4 or a HTC One. We have to send it to the repair store and have it replaced with a new touch screen panel, no matter whether the damage is just on the front glass or deep into the touch panel since they are glued together. The replacement of either of them means both.
To repair a touch screen panel LDC is costly. As one of the most expensive parts of a gadget, a good-quality of touch screen replacement sells some two hundred or three hundred dollars. If we are going to save the repair money for ourselves, friends or family, a touch screen panel LCD and front glass glue separator, actually a convenient disassemble machine, is going to help a lot.
When do we need it?
It is not easy work to separate a LCD and front glass, since they are exquisitely glued together. We have to decide first whether it worth the while to melt the glue off and get them apart. If we find that only the layer of front glass is broken while the internal cost touch screen penal remains intact, we can choose to separate them and only need to replace the front glass, which is very affordable to get, about two or three dollars.
What does it have?
The dissemble machine may appear sophisticated in design and structure. There is no need to pry into and get clear of how everything works internal, but we do have to know the major parts we will work with. There is a heating plate, made of integrative alloy-aluminum with well-distributed heat conduction and not to lose shape easily under high temperature. What’s more, the 4 adjustable molds are used to fix the parts firmly on the machine.
How do we work on it?
The most important thing is that how we can use this machine to separate the LCD and front glass. When it comes to perform this glue separator, no professional knowledge or complicated procedure is involved. Just follow the below instructions.
- Place the touch screen panel on the machine plate and fix it with the folds;
- Power the separator machine to produce heat to 100 Celsius degrees;
- Glue between the LCD and glass to melt under heat;
- Use the strong alloy wire to separate the two until fully apart
Still have no idea how it works? Hit this video to see how to perform it.
Notes:
- Keep the temperature of heat no higher than 100 Celsius, or it would cause damage to the parts;
- Choose the proper voltage standard, either 220V or 110V, according to actual situations.
Cell phone screen is breaking and easy creak. It can be very costly repair to replace the whole screen assemble. That is LCD separator is must to have.
LCD Separator Machine
Posted by: Shane Spall | 09/29/2013 at 10:54 PM
Cell phone screen is breaking and easy creak. It can be very costly repair to replace the whole screen assemble. That is LCD separator is must to have.
LCD Separator Machine
http://www.usreworkstations.com/collections/lcd-separator
Posted by: Shane Spall | 09/29/2013 at 10:56 PM